Diamond Amp Master - 3500GPH - Type 3 - Dolphin Pumps

Diamond Amp Master - 3500GPH - Type 3 - Dolphin Pumps

Availability:
Ships Direct from Manufacture
$518.99
(No reviews yet)
Width:
10.00 (in)
Height:
10.00 (in)
Depth:
12.00 (in)
Current Stock:
Adding to cart… The item has been added
Description

We are an Authorized Dealer for Dolphin Pumps & Aquarium Products.  Dolphin makes some of the best external pumps available for freshwater and saltwater aquariums.

Dolphin Pumps Logo

All Dolphin Amp Master Pumps are manufactured using one impeller designed to operate on each motor as close to 100% efficiency as possible. For this reason we do NOT offer the gimmick of multiple impellers or smaller impellers on the same motor running at poor efficiency rates.

Flow rates on all Amp Master Pumps may be dialed back with a discharge ball valve to any desired flow rate with no harm to the pump. Amperage rate will drop as flow rate is reduced to your desired rate. The most efficient way to plum any system is to install a ball valve at the discharge union then a tee fitting plumbing a closed loop manifold with return reducing tees wherever you want a flow return. A closed loop can be any shape or design as long as both ends return to the tee at the ball valve. This ensures even pressure through your return manifold.

All Dolphin Pumps have pre-filter priming pots available for installations where water is being drawn up from source or when pre filtration of debris is needed.

Diamond Amp Master pumps come in the following models:

 

DIAMOND AMP MASTER 3500

DOLPHIN DIAMOND AMP MASTER DETAILS & FLOW:

DIAMOND AMP MASTER 3500
  • Dimensions 12” x 6 1/4” x 81/4”
  • Silent, cool running
  • 1/15 HP 1725 RPM
  • Circulates 3500 GPH without heat transfer
  • Factory warranty 2-3 years (dependent on seal selection)
  • Suggested use: 55 gallon and over
  • Volt: 115
  • Supplied with 1.5” super seal unions and anti-vibration pump pad
DIAMOND AMP MASTER 4750
  • Dimensions 12” x 6 1/4” x 81/4”
  • Near silent, cool running
  • 1/15 HP 1725 RPM
  • Circulates 4750 GPH without heat transfer
  • Factory warranty 2-3 years (dependant on seal selection)
  • Suggested use: 120 gallon and over
  • Volt: 115
  • Supplied with 1.5” super seal unions and anti-vibration pump pad
DIAMOND AMP MASTER 6250
  • Dimensions 12” x 6 1/4” x 81/4”
  • Quiet, cool running
  • 1/3 HP 1725 RPM
  • Circulates 6250 GPH without heat transfer when well ventilated 
  • Factory warranty 2-3 years (dependent on seal selection)
  • Suggested use: 180 gallons and over
  • Volt: 115
  • Supplied with 1.5” super seal unions and anti-vibration pump pad

Seal Types
Type Application Description Warranty
Type 1 Freshwater Over double the work life expectancy
of other style freshwater seals.		 10-year factory
service guarantee
Type 2 Marine Designed for pumping clean
non-abrasive marine water.		 10-year factory
service guarantee
Type 3 Fresh, marine,
and any abrasive water		 Designed for pumping water containing
abrasive sand and minerals.		 Lifetime factory
service guarantee
Type 4 Fresh, marine,
and any abrasive water		 Recommended for extreme abrasive environments
and where the pump will cycle on and off.		 Lifetime factory
service guarantee
Additional Information
MOTOR TYPE:
AC
FLOW RATING:
1501 or more GPH
CONTROLLABLE:
No